We focus on the sanitary SS pressure vessels, normal pressure vessels, filtration systems research and development, manufacturing, sales and service.
Hot Keywords:
Zhejiang Jhenten MACHINERY CO.,LTD.
Tel: +86-577-86867777
Fax: +86-577-86810195
Email: info@jhenten.com
Single Bag Filter With
The Most Reasonable Structure
JTGDD Top Entry Bag Filter Housing for some coarse filtration and pre filtering...
The side entry into, again from the top into the filter bag design, automatic pressure, does not produce turbulence, reducing the loss of pressure, effective protection of the bag
The top cover is fully pressed and sealed, and the sealing effect is better.
Stabilizer blade, the installation size can be adjusted according to the requirements of the scene
Finish Type |
Mechanical polishing, Electroplate polishing, Sand blasting, pickling |
polishing precision |
Inner surface Ra≤0.6μm , Outside surface Ra≤0.8μm. |
Basket 0.6μm |
Operating Conditions
Max Operating pressure |
0.6MPa、1.0MPa |
Max Operating Temp. |
150℃ |
Material
Shell |
304, 316L, SAF2507, Carbon |
Eyebolt |
304 |
Stabilizer blade |
304 |
O-ring |
EPDM, PTFE, Viton, Silicone |
Connection
Shell connection |
Flange |
In-outlet |
Flange, Quick-open, Screw thread |
Pressure gauge (optional) |
M14×1.5 Internal Screw thread |
Vent valve (optional) |
1/4” Internal Screw thread |
Dimension Parameters |
Cover |
|
1# |
2# |
|
Total height |
790 |
1110 |
The distance from inlet to center |
275 |
|
Diameter |
Φ204 |
Φ204 |
The height from inlet to ground |
620 |
940 |
The height from outlet to ground |
200 |
|
In-outlet dimension |
1.5” or 2” |
|
Stabilizer blade |
550 |
700 |
Max flow, m3/h |
6 |
12 |
Selection Table
|
[Qty. of Bag Filter] |
[Model of Bag Filter] |
[Shell Material] |
[In-outlet connection] |
[O-ring] |
JTGDD |
1P |
2S |
4 |
F |
E |
|
1P=1pc |
1S=1# Bag:Φ180 x 430 |
4= 304 |
F= Flange |
E=EPDM |
|
|
2S=2# Bag:Φ180x 810 |
6= 316L |
K= Quick-open |
P=PTFE |
|
|
3S=3# Bag:Φ105 x 230 |
|
L= Screw thread |
V=Viton |
|
|
4S=4# Bag:Φ105x 380 |
|
|
S=Silicone |
Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.info@jhenten.com, also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)
Y-Type Filter
JTGTB Precision titanium stick filter
Duplex (multi) Strainer
JTGKQ Gas(Steam) Filter Housing
JTGMF Mechanical(Carbon, Sand)Filter Housing
JTGCX Magnetic Fluid Filter Housing
JTGTF Tube Filter Housing
JTGLF Basket Type Filter Housing
JTGLL Basket Filter Housing
JTGYB Swing Fluid Filter Housing
JTGRP Security Filter Housing
JTGHF Large Flow Liquid Filter
JTGSF Multi Fluid Industrial Filter Housing
TGDG Single Fluid Industrial Filter Housing
JTGJM Precision Liquid Filter
JTGLD Multi Fluid Sanitary Filter Housing
JTGDX Single Fluid Sanitary Filter Housing
JTGPY Disc-type Diatomite Filter
JTGDB Lenticular Filter Housing
JTGDS Multi Bag Filter Housing
JTGCD Side Entry Bag Filter Housing
Double-pipe filter
Titanium rod filter
Security filters
L-tube filter
High Flow Filter housing
Side Entry Bag Filter
Top Entry Bag Filter
S-Multi Bag Filter
B-Multi Bag Filter
Single Round Filter
Single Sanitary Filter Housing
Sanitary Filter Housing
Lenticular Filter Housing
Cartridge Filter Housing
Precise Filter Housing
Industrial Cartridge Filter
Basket Type Filter
Steam(Gas)Filter
Mechanical (Carbon,sand)Filter
Wine Barrel
We focus on the sanitary SS pressure vessels, normal pressure vessels, filtration systems research and development, manufacturing, sales and service.
CopyRight © 2021 Zhejiang Jhenten MACHINERY CO.,LTD.